Description
SRNE 200V hybrid inverter
・As of November 24: 1 unit in stock ・If there is no stock, it will be ordered from the manufacturer and will arrive in about 3 months.
By connecting a 48V battery system and a solar panel, an AC power supply system with AC200V 5kW output can be constructed.
Warranty period | half a year |
---|---|
Spontaneous failure (under the usage environment in accordance with the instruction manual and the manufacturer's warranty regulations) Failures that occur during proper use) are covered by the warranty. The warranty does not cover damage caused by intentional or improper maintenance of the system, misuse, or improper repair or modification. note that. |
Features of this product In addition, the PV input voltage of the solar panel supports up to 450V (mostly 150V or 250V)
By using it with a battery, the power charged by the solar panel is stored when not in use, and when it is used, the stored battery can be used preferentially, or normally stored and used while giving priority to commercial power supply. You can select and set the priority, such as using the battery in the event of a power failure.
Click here for specifications
https://www.srnesolar.com/wp-content/uploads/2020/11/High-pressure-reserve-control-all-in-one-machine-HF4850S80-H-Specification.pdf
WIFI module pre-set
Major features
13.Supports CAN, USB and RS485 communication
model |
HF4830S60-H |
HF4850S80-H |
AC mode |
||
Rated input voltage |
220/230Vac |
|
Input voltage range |
(170Vac~280Vac) ±2%;(90Vac~280Vac) ±2% |
|
frequency |
50Hz/60Hz (automatic detection) |
|
Frequency range |
47±0.3Hz~55±0.3Hz(50Hz)/57±0.3Hz~65±0.3Hz(60Hz); |
|
Overload/short circuit protection |
breaker |
|
efficiency |
>95% |
|
Conversion time (bypass and inverter) |
10ms (typical value) |
|
AC reverse protection |
yes |
|
Maximum bypass overload current |
30A |
40A |
Reverse mode |
||
Output voltage waveform |
pure sine wave |
|
Rated output power (VA) |
3000 |
5000 |
Rated output power (W) |
3000 |
5000 |
Power factor |
1 |
|
Rated output voltage (Vac) |
230 Vac |
|
Output voltage error |
±5% |
|
Output frequency range (Hz) |
50Hz±0.3Hz/60Hz±0.3Hz |
|
efficiency |
>90% |
|
overload protection |
(102% (125% Load>150% ±10%: Report an error and turn off the output after 5 seconds. |
|
maximum power |
6000VA |
10000VA |
load motor capacity |
2 hp |
4 hp |
Output short protection |
breaker |
|
Bypass breaker specifications |
30A |
40A |
Rated battery input voltage |
48V (minimum starting voltage 44V) |
|
battery voltage range |
40.0Vdc~60Vdc ± 0.6Vdc (under voltage alarm/off voltage/over voltage alarm/over voltage recovery…settable LCD screen) |
|
Power saving mode |
Load ≤25W |
|
AC charging |
||
Battery Type |
lead acid or lithium battery |
|
Maximum charging current |
60A |
60A |
charge current error |
±5Adc |
|
Charge voltage range |
40~60Vdc |
|
short circuit protection |
Circuit breakers and blown fuses |
|
Breaker specifications |
30A |
40A |
Overcharge protection |
Sound an alarm and turn off charging after 1 minute |
|
solar charging |
||
Maximum PV open-circuit voltage |
500Vdc |
|
PV operating voltage range |
120-500Vdc |
|
MPPT voltage range |
120-450Vdc |
|
battery voltage range |
40-60Vdc |
|
Maximum output power |
3000W |
5000W |
Charging current range for solar energy (configurable) |
0-60A |
0-80A |
charging short circuit protection |
blown fuse |
|
wiring protection |
Reverse polarity protection |
|
Certification specification |
||
Specification certification |
CE (IEC/EN62109-1,-2), ROHS2.0 |
|
EMC certified grade |
EN61000 |
|
Operating temperature limit |
-15°C to 55°C |
|
Storage temperature range |
-25°C to 60°C |
|
Humidity range |
5% to 95% (conformal coating protection) |
|
noise |
≤60dB |
|
heat dissipation |
Forced air cooling, variable speed fan |
|
Communication interface |
USB/RS485(Bluetooth/WiFi/GPRS)/Dry node control |
|
Dimensions (L*W*D) |
426mm×322mm×126mm |
|
Weight (kg) |
11 |
Various certificates